消防员防化服

全密封防化服，重型防化服RFH-02是消防员进入化学危险物品或腐蚀性物品火灾或事故现场，以及有毒、有害气体或事故现场，寻找火源或事故点，抢救遇难人员，进行灭火战斗和抢险救援时穿着的防护服装。
消防防化服防酸渗透性能（80%H2SO460%HNO330%HCL）；60min不渗透
消防防化服防碱渗透性能（6.1mol/LNaOH）；60min不渗透
消防防化服阻燃性能：有焰燃烧时间≤2s
消防防化服无焰燃烧时间≤10s
消防防化服损毁长度≤10cm（无熔融、滴落现象）
消防防化服重量＜7Kg

Thank you for purchasing our company's products, and for your safety and health, please read the manual carefully before using.
　　RFH-01 Air-tight Chemical Protective Suits produced in our company is strictly detected and is according to the EU standard of BS EN943-1：2002 . The raw materials we use are also detected and is complied to the requirements of the terms in BS EN943-1：2002.
　　RFH-01 Air-tight Chemical Protective Suits is one kind of the fireman suits which is worn when the firemen fight with fire or rescue in the places where there are dangerous chemicals or caustic things and they use this to protect themselves from the possible harm of the chemicals or the caustic things.
　　The main part of the rubberized fabric of RFH-01 Air-tight Chemical Protective Suits uses the silk cloth which is processed by flame-retardant and tackifying methods. Both of its two sides are covered with chemical-protective face-glue. The rubberized fabric only carbonizes but without melting drops and keeps good strength when contacting with fire. The rubberized fabric is made into the main part of the suits and gloves through the process of paste, tailoring, and hot-sealing strip. It can also be made into the whole suits by combining with fire-retardant, voltage resistant, anti-puncture boots or fire-fighting boots.

1 Sizes

Sizes	S	M	L	XL
Length（From collar to boots）（cm）	160	166	171	177
Chest circumference（cm）	55	56	57	58
Waistline（cm）	115	122	125	126
Shoe size（cm）	25	26	27	27
Body Heights（cm）	165－170	170－175	175－180	180－185

2 Main technical parameters
（1）The main part of the rubberized fabric
　　The thickness of the rubberized fabric 0.45+0.05mm
　　The tensile strength average of the Longitude and Latitude not less than 450N/5cm
　　The tearing strength average of the Longitude and Latitude not less than 32N
　　The performance of Anti-sour penetration (10mm×1h)(80％H2S04,60％HN03,30％HCL) No penetration
　　The performance of Anti-sour penetration （6.1mo1/LNa0H） No penetration
　　The performance of fire retardant the lasting time of burning not over 2s
　　The time of stopping fire not over 10s the length destroyed not over 10cm
Anti-aging caused by hot （125℃×24h）not pitchy, not brittle
　　The performance of anti-coldness （-25℃×5minfolded to 180°）without cracks
　　The performance of anti-petrol （soaked in120＃petrol for 30s）no cracks nor pitchy
　　The adherisive strength between the fabric and the glue not less than 0.78KN/M
（2）The table below is the performance of fire-fighting boots

Fire-fighting boots

1 The rate of the tearing length of the boots surface：≥450％

2 The performance of anti- penetration of the boots bottom：≥900N

3 The performance of anti- wear of the boots bottom：≤0.9cm3/1.61km

4 The performance of anti- oil of the boots bottom：surface and bottom of the shoes，-2～10％

5 The strength of sticky of the sticky strips：≥600N/m

6 The anti-voltage of the boots bottom：≥5000V

7 The tearing length of the shoe surface after aging ：≥75％

8 The performance of anti-corrosion of the steel gasket No corrosion

9 The performance of anti-hot of the boots bottom：≤22℃

10 The performance of anti-slippery of the boots：≥115°

11 Weight：≤1.8kg

12 The performance of anti-penetration：Water immersion 2h no penetration